Profile Editor Software 16
Changing settings on the Companion Mini
Place the Companion Mini in to test mode
(see device installation section on this handbook)
Click on the Icon which should
be found on your desktop after
Prole editor has been installed.
Click on seizure detection settings to make adjustments.
Click save to device to save new settings.
All the Companion Mini’s are supplied with a default setting;
`
Medium sensitivity (3)
` 15 Seconds delay (The Companion Mini with detects 15 seconds of continuous
movement before alarming).
If required, these setting can be adjusted using the Alert-iT prole Editing
software which is available to down load free from our Support page
www.alert-it.co.uk/support
Installation instructions are available with in the download.
A USB lead is provided to connect between the Mini and your Computer.
Using Profile editor
To Next Page
Loading...
Need help?
General
