Alert-it Plesio Pager Handbook

7
To turn the Pager on, press and hold the ON/OFF button for 3 seconds.
The pager will beep and all three LEDs will ash. The green Pager LED
will blip every 8 seconds to show that the pager is awake and listening
for alarm signals.
` If the monitor is turned on, you now see the red Monitor LED on the
pager blip every 8 seconds.
Turning on the Pager
PLEASE NOTE:
While the pager is shipped with
some charge in the batteries, it is
recommended that the pager is
charged before use.
To turn the pager off, press and hold the On / Off button for
3 seconds. The pager will bleep and all three LEDs will
ash 3 times.
Turning off the Pager
Alarm LED
Pair/Mute
Pager LED
Monitor LED
On / Off
Figure 2

Alert-it Plesio Pager Specifications

General

Brand	Alert-it
Model	Plesio Pager
Category	Monitor
Language	English