ALERTON MS/TP Microset II - Table of Contents

Installation and Operations Guide
|
Contents
© Honeywell LTBT-MSTPMS2IOG Rev. 02
3
Contents
Quick reference 4
Quick reference (continued) 5
Introduction 6
Specifications 7
Mounting 8
Wiring 12
Wire specifications 12
Power supply guidelines and requirements 12
MS/TP Microset II power ratings 12
Power supply grounding and wiring 13
MS/TP LAN wiring 14
Terminating MS/TP LAN cabling 15
Grounding the MS/TP LAN shield 15
Terminating resistors 16
Operational overview 17
Hotel vs. office modes 17
Fan-control vs. no-fan-control modes 17
Cooling and heating setpoint calculation 17
After-hours override operation 18
Housekeeping override operation 18
English and metric units 18
Outside air temperature (OAT) display 19
LCD backlight operation 19
Testing the LCD backlight/ LCD/ and MS/TP status 19
Viewing communications status 20
Operating mode specifics 21
Enabling operating modes 22
Office modes 22
Hotel modes 30
Field service mode 35
Setting the MS/TP MAC address and BACnet device instance 38
BACnet object and property reference 39
MS/TP Microset II objects 40
Object properties 40
BV and AV assignments 43