metronome is playing, the Rec/Start/Stop LED will flash at the current tempo.
3. Press the Rec/Start/Stop button again to stop recording. The Rec/Start/Stop LED will be lit solid to confirm a
song exists.
4. Press the Rec/Start/Stop button again to playback the recording. The Rec/Start/Stop LED will slowly flash
continuously. Press the Rec/Start/Stop button again to stop the user song. The Rec/Start/Stop LED will be lit
solid when a song exists and is stopped.
5. Press and hold the Rec/Start/Stop button for 3 seconds to erase the user song. The Rec/Start/Stop LED will
quickly flash 3 times to confirm it has been erased.
Important User Song Mode Notes:
The recorded user song will stay in memory until it is erased.
If the internal memory becomes full during recording, the recording will automatically stop and be saved.
Reverb
You can also add an adjustable reverb effect to your
sound.
To select the reverb effect type, press and hold Key Function, and then press a key from C5 to F5. The available
selections for this Key Function are Off, (C5), Hall 1 (C#5), Hall 2 (D5), Stage (D#5), Room (E5), and Plate (F5).
To change the depth of the reverb, press and hold Key Function, and then press F#5 or G5 respectively. To
increase or decrease this by multiple steps, press and hold Key Function, and then press F#5 or G5 repeatedly.
To set the depth of the reverb to the factory default value (3) , press and hold Key Function, and then press
G#5.
Transpose
This key function allows the overall pitch of the piano to be transposed up
or down by a maximum of one octave in semitone increments in either direction.
To change the transposition, press and hold Key Function, and then press F#4 or G4 respectively. To increase or
decrease this by multiple steps, press and hold Key Function, and then press F#4 or G4 repeatedly.
To Next Page
