Alesis QS6.2 - Configuration 1: 1 REVERB

11
Editing Effects
72
Configuration 1: 1 REVERB
1 REVERB is a general-purpose configuration with four Sends, each
with a variety of effects which all feed into a single Reverb.
Sends 1 and 2 have a Pitch effect followed by a stereo Delay. Send 3 has
a mono Pitch effect followed by a mono Delay. Send 4 has a mono
Delay.
The output of all of these paths are mixed and sent into a single Reverb.
The Reverb parameters are in Send 1.
LEZLIE
FX SEND 1
FX SEND 2
MAIN LEFT
MAIN RIGHT
MAIN LEFT
MAIN RIGHT
DELA Y 1
1
REVERB
FX SEND 3
FX SEND 4
PITCH 2 DELA Y 2
AMP
AMP
PITCH 3
DELA Y 3
AMP
DELA Y 4
AMP
1
2
1
2
1
2
1
2
BAL.
BAL.
BAL.
BAL.
BAL.
2 3 1 2 3 14 MIX
REVERB 1
REVERB 2
REVERB 3
REVERB 4
DELA Y 1
DELA Y 2
DELA Y 3
DELA Y 4
PITCH 1
PITCH 2
PITCH 3
BAL.
BAL.
NOTE: Each Pitch, Delay and Reverb
module has its own independent mix output
level which controls how much signal is
routed directly to the main outputs.
SEND1
SEND2
SEND3
SEND4
PITCH1
PITCH2
PITCH3
DELAY1
DELAY2
DELAY3
DELAY4
REVE
RB
MAIN LEFT
MAIN RIGHT
MAIN LEFT
MAIN RIGHT
OUTPUT MIX SECTION
RvbIN1/IN2
RvbInLevel
DelSND/PCH
1
2
1
2
1
2
1
2
1 2 3
1 2 3 4
1
DelSND/PCH
DelSND/PCH
RvbIN1/IN2
RvbIN1/IN2
RvbIN1/IN2
o
o