Alesis QS6.2 - Configuration 2: 2 REVERBS

Editing Effects
11
73
Configuration 2: 2 REVERBS
This Configuration should be used when two different reverbs are
needed. For example, you might need a gated reverb for drums and a
regular reverb for everything else.
Send 1 is routed through a mono Delay, then a Chorus, then to the first
Reverb. Send 2 is routed directly to the first Reverb.
Send 3 is routed through a mono Chorus, then to the second Reverb.
Send 4 is routed directly to the second Reverb.
REVERB1
REVERB3
PITCH
1
PITCH3
DELAY1
SEND1
SEND2
SEND3
SEND4
MAIN LEFT
MAIN RIGHT
Chrs In Lev
MAIN LEFT
MAIN RIGHT
MIX1 SECTION
MIX3
RvbIn Send2
RvbIn Send4
Chrs In Lev
DelayIn Lev