NEVER neglect a red signal/alarm. Find out what caused the alarm and
remedy it by skilled person and reset the alarm.
3.4.0 Noise Emission
Noise emission corresponds to the values for the pump mounted.
The mean sound pressures levels (Lp) measured at as Curve A (ISO 1680
standard).
The noise values were measured with 50 Hz motor running idle with a tolerance of
3 dB(A).
LpA<70 dBA
3.5.0 Modifications and Reconstruction
Please note that the machinery must not be altered or modified in any way if not
directly approved of by Alfa Laval.
Use of original spare parts and accessories guarantee a safe operation. Use of parts
from other manufacturers can lead to premature failure of the machinery, cause
damage to the machine and surrounding area and jeopardize the warranty.
Module is designed for safe area installation. It should not be used for any hazardous
or ATEX classified area.
To Next Page
Loading...
Need help?
General
