Need help?Do you have a question about the Alfa Laval T2 and is the answer not in the manual?
Details the process for installing heating insulation for small gasketed plate heat exchangers, noting its integrated design.
Provides instructions for installing heating insulation on medium-sized gasketed plate heat exchangers, covering latch and screw assembly methods.
Outlines the procedure for installing heating insulation on large gasketed plate heat exchangers, including team assembly and latching recommendations.
Details the process for installing heating insulation for small gasketed plate heat exchangers, noting its integrated design.
Provides instructions for installing heating insulation on medium-sized gasketed plate heat exchangers, covering latch and screw assembly methods.
Outlines the procedure for installing heating insulation on large gasketed plate heat exchangers, including team assembly and latching recommendations.
General| Plate Material | Stainless Steel |
|---|---|
| Gasket Material | NBR, EPDM |
| Max. Working Pressure | 10 bar |
| Type | Plate Heat Exchanger |
| Applications | Dairy, Food, Beverage |
| Plate Thickness | 0.5 mm |
| Capacity | Varies depending on configuration |
| Material | Stainless Steel |
| Weight | Varies by configuration |
| Dimensions | Varies by configuration |
To Next Page