6 Measurements
The table below shows maximum dimensions and measurements in mm
(inch). For exact measurements, use the sales configuration tool. Only GPHE
models available with heating insulation are shown below.
NOTE
The data listed in the table below are for a standard plate heat exchanger with a
standard carrying bar, hole only in the frame plate and standard connections. For
non-standard plate heat exchangers, contact your Alfa Laval representative.
Product
(AQ-
model)
Frame Type
L1
Unholed pres-
sure plate
L1
Holed pressure
plate
W1 H1
T2
(AQ1A)
FG ALS
Static measure-
ments.
Depends on LC.
Static measure-
ments.
Depends on LC.
220
(8.66)
420
(16.53)
M3
(AQ1)
FG ALS/ASME
Static measure-
ments.
Depends on LC.
Static measure-
ments.
Depends on LC.
260
(10.23)
520
(20.47)
TL3
(AQ1L)
FG PED/ALS/ASME
Static measure-
ments.
Depends on LC.
Static measure-
ments.
Depends on LC.
270
(10.62)
830
(32.67)
T5
(AQ2A)
FG ALS
Static measure-
ments.
Depends on LC.
Static measure-
ments.
Depends on LC.
380
(14.96)
766
(30.15)
TS6
(AQ2S)
FD/FG/FM PED/ALS/ASME
A + 300
(A + 11.81)
A + 300
(A + 11.81)
445
(17.51)
708
(27.87)
T6
(AQ2T)
FD/FG/FM PED/ALS/ASME
A + 320
(A + 12.59)
A + 320
(A + 12.59)
450
(17.71)
905
(35.62)
TL6
(AQ2L)
FD
PED/ALS
A + 360
(A + 14.17)
A + 360
(A + 14.17)
490
(19.29)
1265
(49.80)
ASME
A + 360
(A + 14.17)
A + 360
(A + 14.17)
490
(19.29)
1313
(51.69)
FG
PED/ALS
A + 360
(A + 14.17)
A + 360
(A + 14.17)
490
(19.29)
1265
(49.80)
ASME
A + 360
(A + 14.17)
A + 360
(A + 14.17)
460
(18.11)
1304
(51.33)
FM PED/ALS
A + 360
(A + 14.17)
A + 360
(A + 14.17)
490
(19.29)
1265
(49.80)
M6
(AQ2T)
FM
PED/ALS/ASME
Static measure-
ments, depends
on A mesure
Static measure-
ments, depends
on A mesure
450 925
FG PED/ALS/ASME
Static measure-
ments, depends
on A mesure
Static measure-
ments, depends
on A mesure
450 925
FD PED/ALS/ASME
Static measure-
ments, depends
on A mesure
Static measure-
ments, depends
on A mesure
450 925
200003991-1-EN-GB 15
EN
To Next Page
Loading...
Need help?
General
