Alfa Laval CSI SPC-2 User Manual

3
3. Safety precautions
Installation:
:
Operation:
:
:
:
Maintenance:
:
:
- Always read the technical data thoroughly
(See page 14).
- Always release compressed air after use.
- Always read the technical data thoroughly
(See page 14).
- Always release compressed air after use.
- Always disconnect the electrical connection
before dismantling.
- Never touch the valve or the pipelines when
processing hot liquids or when sterilizing.
- Never dismantle the valve with valve and
pipelines under pressure.
Always handle lye and acid with great care.
- Always read the technical data thoroughly
(See page 14).
- Always release compressed air after use.
- Always disconnect the electrical connection
before service.
- Never service the valve when it is hot.
- Never service the valve with valve and pipe-
lines under pressure.
All warnings in the manual are summarized on this
page.
Pay special attention to the instructions below so that
severe personal injury and/or damage to the valve
are avoided.
Safety

Alfa Laval CSI SPC-2 Specifications

General

Brand	Alfa Laval
Model	CSI SPC-2
Category	Control Unit
Language	English