9 Maintenance
9.4.4 Replacement of O-rings in clarifier bowl
Converting from purifier to clarifier bowl or vice versa is described in 5 Working principle of the
separator.
Comments to illustrations on opposite page.
Illustration 5:
Take care of the washer.
Illustration 14:
Check that the washer is fitted. Otherwise there is a risk that the bowl will not make fir m contact
with the spindle.
If two or more washers a re fitted accidentally this will prevent the top parts of the bowl from being
positioned correctly.
Illustration 15:
N
O
T
E
Fit the upper O-ring outside the level ring, see comments to illustration 17 .
64
To Next Page
Loading...
