1 Safety instructions
Study this instruction m anual
and observe the warnings
before installation, operation,
service and maintenance.
Not following the instructions
can result in serious accidents.
The centrifugal separator, which is the major
part of the cleaning unit, includes parts that
rotate at high speed.
Incorrect operation and maintenance of the
cleaning unit can result in ser ious damage
and/or injury.
The following basic safety instructions therefore
apply:
• Use the cleaning unit only for the
purpose and parameter range specified
by Alfa Laval.
• Only use the cleaning unit in
non-explosion environment.
• Strictly follow the instructions for
installation, operation and maintenance.
• Ensure that personnel are competent
and have sufficient knowledge of
maintenance and operation.
• Use only Alfa Laval genuine spare parts
and the special tools supplied.
D
!
A
NG
E
R
Electrocution risk
Switch off the power supply and remove the
electric cables from the sockets before opening the
starte r/control units for separator and/or he ate r.
7
To Next Page
Loading...
