7 Operating instructions
7.4 Start
1. Connect the unit to the power supply.
N
O
T
E
If the power supply is eq uippe d with an ELCB (Earth
Leakage Circuit Breaker) make sure that it is of
industrial type that allows higher leakage current.
N
O
T
E
The unit must be connec ted to an earthed o utlet.
N
O
T
E
ProgramP1–5Auto,orP6Manualmustbechosen.
See
6.1.1 Program on page 31.
2. When all alarms are acknowledged, the
operator can tap the Start button and the cleaning
unit will start. The separator starts.
G1106611
3. For purifier mode only!
(Purifier mode is described in 5 Working principle
of the separator on page 19).
Before start, fill the filler cup with water. When
the text on the display indicates “For purifier
mode add water”, add the water to the separator
by opening the valve (1).
G0906111
40
To Next Page
Loading...
