Alfa Laval LKH-112 User Manual

3 Installation
The LKH-110 and -120P pump is highly efficient and econominal centrifugal pump, which meets the requirements of sanitary
and gently product treatment and chemical resistance. LKH-110 and the LKH-120P is avaliable in the following sizes, LKH-112,
-113, -114 and LKH122/P, -123/P, -124/P. The instruction manual is part of the delivery. Study the instructions carefully. The
large pump sizes are very heavy. ALfa Laval recommends the use of a lifting crane when handling the pump.
3.1 Unpacking/delivery
Step 1
!
Always use a lifting crane when handling the pump
CAUTION
Alfa Laval cannot be held responsible for incorrect unpacking.
WARNING:
Be aware that certain pump configurations can tilt, and thereby
cause injuries to feet or fingers. The pump should be supported
underneath the adaptor, when not installed in the process line.
Check the delivery for:
1. Complete pump.
2. Delivery note.
3. Instruction manual.
4. Motor instructions.
5. Test certificate, IF ORDERED!
Step 2
Remove possible packing materials from the inlet and the outlet.
Avoid damaging the inlet and the outlet.
Avoid damaging the connections for flushing liquid, if supplied.
* Remove packing materials!
3003-0085
!
*
*
*
Step 3
Inspect the pump for visible transport damages.
3003-0086
9

Alfa Laval LKH-112 Specifications

General

Brand	Alfa Laval
Model	LKH-112
Category	Water Pump
Language	English