3 Installation
3.3 Recycling information
• Unpacking
- Packing material consists of wood, plastics, cardboard boxes and in some cases metal straps.
- Wood and cardboard boxes can be reused, recycled or used for energy recovery.
- Plastics should be recycled or burnt at a licensed waste incineration plant.
- Metal straps should be sent for material recycling.
• Maintenance
- During mainten
ance oil and wear parts in the machine are replaced.
- All metal parts
should be sent for material recycling.
- Worn out or def
ective electronic parts should be sent to a licensed handler for material recycling.
-Oilandallnon
metal wear parts must be taken care of in agreement with local regulations.
• Scrapping
- At end of use, the equipment shall be recycled according to relevant, local regulations. Beside the equipment itself, any
hazardous residues from the process liquid must be considered and dealt with in a proper manner. When in doubt, or in the
absence of local regulations, please contact the local Alfa Laval sales company.
16
To Next Page
Loading...
Need help?
General
