English Maintenance
10 Plate Heat Exchanger
EN
EN
Manual cleaning of opened units
Deposits removable with water and brush
Plates need not to be removed from the plate heat exchanger during cleaning.
Remove deposits using a soft brush and
running water.
Rinse with water using a high pressure
hose.
Deposits not removable with water and brush
Plates must be removed from the plate heat exchanger during cleaning.
Brush with cleaning agent. Rinse with water.
Caution!
Never use hydrochloric acid with
stainless steel plates. Water of more
than 330 ppm Cl may not be used for
the preparation of cleaning solutions.
It is very important that carrying bars
and support columns in aluminium
are protected against chemicals.
Note!
Be careful not to damage the gasket dur-
ing manual cleaning.
1 2
1 2
To Next Page
Loading...
Need help?
General
