3 Limitations
The cooling insulation has the following limitations:
• The insulation can only be used for a certain temperature range. For more
information, see the section Technical data.
• Insulation may not be available for all plate heat exchanger models with
holed pressure plate.
• The insulation can not be used in combination with connectivity rings.
• Insulation in combination with protection sheet is not available.
• If longer stud bolts are selected, standard insulation does not fit.
• Insulation only available up to size T25.
• The insulation is not diffusion tight.
• The insulation is for interior use only.
• The insulation can not be used together with a U-turn separator.
200002797-1-EN-GB 9
EN
To Next Page
Loading...
Need help?
General
