Why is the red LED flashing on my Alfa Laval Industrial Equipment?
If the red LED is flashing on your Alfa Laval Industrial Equipment, it indicates insufficient air pressure in the actuator. To resolve this, check the air supply and the air connections on the unit.
What to do if the red LED is flashing on my Alfa Laval ThinkTop D30?
If the red LED is flashing, it indicates insufficient air pressure in the actuator. Check the air supply and the air connections on the unit.
General| Power Supply | 24 V DC |
|---|---|
| Communication | AS-Interface |
| Storage Temperature | -40°C to +85°C |
| Weight | 0.5 kg |
| Sensor Type | Inductive proximity sensors |
Key guidelines and warnings for safe handling and operation of the ThinkTop D30 unit.
Explanation and identification of standard safety symbols used throughout the manual.
Detailed safety measures for installation and maintenance procedures to prevent injury.
Introduction to the ThinkTop D30's design and its role in valve control systems.
Explanation of how the ThinkTop D30 monitors valve status and communicates with PLCs.
Guidelines for the proper disposal and recycling of the ThinkTop D30 and its packaging.
Physical dimensions and specifications of the ThinkTop D30 unit.
List of valve actuators that are compatible with the ThinkTop D30 control unit.
Step-by-step guide for physically mounting and connecting the ThinkTop D30 to an actuator.
Description of the LED indicators on the ThinkTop D30 and their meanings for actuator status.
Identifies common issues, their possible causes, and recommended solutions for the ThinkTop D30.
Detailed enumeration of parts with quantities and designations for the ThinkTop D30.
To Next Page