11
RPM
This menu is a direct access allowing
configuring the RPM.
Note : This menu is identical to the one that
is in the menu BOX
Speed. (M4GPS GPS must be « OFF »)
Speed by transmission.
This option allows to obtain the speed by
the calculation of the rotation speed of the
engine (RPM) divided by the coefficient of
the transmission.
Note : This method is useful on vehicles for
direct transmission without gearbox.
Graphic setting
Allows to modify the range of the bars-
graphs from 0.5 seconds till 10 seconds to
analyze the data in the menu DATA.
Frequency of sampling
Allows to select the frequency of data
recording:
- 10 hertz ->every 100 ms
- 5 hertz ->every 200 ms
- 2 hertz ->every 500 ms
- 0 hertz ->only lap times and partial times
(adapted for long-distance races)
Note : Observe the remaining duration and
the available total time; these will depend
on the chosen frequency.
To Next Page
Loading...
Need help?
General
