10
GPS check (only for pack M4GPS)
Allows you to visualize:
- The intensity of the satellite signals
- The GPS coordinates
- The GPS date and hour
- The altitude in meters
Running time meters
Two available meters, the first one
accumulates the total time; the second
accumulates the total distance.
The latter is not visible on M4.
Press « OK » for one second to reset the
selected meter.
Peak
Peak allows you modify the amount of time
certain information will be displayed on the
screen at the end of each lap.
The Peak «Lap Time» allowsthe
accomplished time of the previous lap to be
fixed on the screen
Setting :
- Lap time : from 1 to 60 sec. or fixed.
- RPM : from 0 to 60 sec.
- Speed : from 0 to 60 sec.
- Temperature T1 : from 0 to 60 sec.
Note : the value 0 = Peak not active
To Next Page
Loading...
Need help?
General
