Algo 8198 - Advanced Settings - Multicast; Multicast Configuration; Multicast Zone Definitions; Audio Synchronization

8198 SIP Ceiling Speaker PoE+
Document 90-00109 Algo Communication Products Ltd (604) 454-3792
2020-09-21 4500 Beedie St Burnaby BC Canada V5J 5L2 support@algosolutions.com
Page 56 www.algosolutions.com
Advanced Settings Tab – Advanced Multicast
Note: The settings on this tab are only visible when in master or slave multicast mode.
The default prepopulated multicast addresses above will work in most cases and should
only be altered for rare cases.
Audio Sync (Slave Mode)
When using multicast with other third-party devices that have a delay in their audio path,
the audio on the 8198 may be heard slightly earlier than on these other devices. By
adding audio delay up to one second, the 8198 may be synchronized with other
speakers or telephones that have greater latency. This feature applies to Multicast Slave
mode only.