AlgoForce E1500
13
100 Tones:
Each conductivity target ID is associated with a unique audio pitch ranging from 250Hz to 1042Hz.
Higher conductivity target IDs produce higher audio pitches, facilitating differentiation of targets.
100 Tones Inv.:
Each conductivity target ID is associated with a unique audio pitch ranging from 250Hz to 1042Hz.
Higher conductivity target IDs produce lower audio pitches, facilitating differentiation of targets.
5 Tones Inv. and 100 Tones Inv. are added to provide an alternative audio feedback option,
leveraging the fact that human ears are more sensitive to high-pitched sounds. When users are
searching for highly conductive targets with higher target IDs, 5 Tones and 100 Tones can be used to
emphasise these signals. However, when targeting small items, such as small gold nuggets with
lower target IDs, 5 Tones Inv. and 100 Tones Inv. can be utilised to highlight these signals with
higher-pitched tones, improving detection and identification.
In Classic Tones audio setting, users retain the ability to adjust the audio threshold through the
Threshold setting. In both 5 Tones audio setting and 100 Tones audio setting, the audio threshold is
fixed at zero. This ensures ease of differentiation between conductivity target IDs solely based on
unique audio pitches, eliminating potential confusion with the audio threshold.
If a pinpointer is used to pinpoint the target and you find that the detector is interfering with the
pinpointer, you can turn off the detector's transmitter by double-clicking the Power On/Off button.
To turn back on the transmitter, simply press any button.
To Next Page
Loading...
