AlgoForce E1500
21
Bug Report and Feature Request
AlgoForce highly values customer feedback as a crucial means of enhancing our products. To ensure
a seamless feedback process, we encourage you to reach out to us directly via email at
admin@algoforce.com.au. If you come across any bugs or have ideas for new features that could
enhance your metal detecting experience, please send us an email with a detailed description of the
issue or requested feature. Kindly include the hardware serial number and firmware version of your
detector (located in the Miscellaneous setting) in your email. Our dedicated team of developers will
promptly review your feedback and respond to you accordingly. We appreciate your contribution
and look forward to working together to improve our products.
Safety and Care
To ensure safe use and longevity of your AlgoForce E1500 Plus, please follow these guidelines:
Do not immerse the control box in water; it is not water-resistant.
Clean the detector with a damp cloth, not solvents.
Avoid extreme temperatures and keep it out of vehicles in extreme weather.
The detector has small parts that could be a choking hazard, keep it away from children.
Avoid contacting the detector with sharp objects to prevent scratches or damage.
Handle the detector with care during transportation or storage to prevent violent vibrations
or drops.
Stay aware of your surroundings, especially when wearing headphones.
The detector has an ambient sound awareness feature for headphone use, but it does not
guarantee that all sounds will be heard.
Before using in public areas, check local laws and regulations.
Avoid disconnecting or connecting the coil to the control box after the unit has been
powered up, as doing so could potentially damage the control box.
The AlgoForce E1500 Plus is specifically designed to operate with mono coils, utilizing the
mono winding for both transmission and reception. While it's technically possible to plug in
a DD coil, only the transmit winding would function as a mono coil, as the receive winding
would remain open circuit. DD coils are not recommended for use with the AlgoForce E1500
Plus.
When using coils heavier than the NF 14”x9” Evo, the shaft may experience slight wobbling
despite tightening the spin locks.
When the telescopic shaft is fully or nearly fully extended, it may experience wobbling. It is
recommended to keep the maximum extension length of both the lower and middle shafts
at least 5cm shorter than their full extension length.
Over-tightening the spin locks could cause damage to them.
To Next Page
Loading...
