AlgoForce E1500
28
Release Note for Software V1.1.3
Software Version 1.1.3 is designed for both the E1500 and the E1500 Plus. By default, the E1500 Plus
comes pre-installed with this version unless a newer version becomes available.
For E1500 users, rest assured that all future software versions developed for the E1500 Plus will
remain fully compatible with the E1500. Users can easily upgrade their E1500 using the binary
update file provided for the E1500 Plus.
Software V1.1.3 includes the following updates and improvements:
1. Enhanced Display Theme Switching:
Previously, switching between dark and light display themes was only possible through the
Miscellaneous settings menu.
Now, users can switch display themes from anywhere by holding the Backlight/Theme
button, providing greater convenience and ease of use.
2. New Audio Settings in Pinpoint Mode:
Added 5 Tones Inv. and 100 Tones Inv. audio settings, offering an alternative feedback
option.
These settings take advantage of human sensitivity to high-pitched sounds to better target
identification:
5 Tones and 100 Tones: Best for identifying highly conductive targets with higher target
IDs.
5 Tones Inv. and 100 Tones Inv.: Ideal for detecting small items, such as gold nuggets,
with lower target IDs, as higher-pitched tones are used to highlight these signals.
22/01/2025
To Previous Page
Loading...
