AlgoForce E1500
9
⑥ Set the shaft to the appropriate length and attach the coil.
⑦ Plug the coil connector into the control box.
⑧ Use cable straps to tie the coil cable and USB cable to the shaft.
⑨ Use the Velcro strap with buckle to secure the headphone socket to the shaft.
Note: The following images offer a close-up view of the fastening mechanism for the headphone
socket. When the socket is not in use, a dust cap can be applied to keep it dust-free.
⑩ For compact storage, release the two twist locks, collapse the shaft and remove the coil.
To Next Page
Loading...
