7 Turn on your computer.
A message is displayed to confirm that the CMOS settings are reset and
default BIOS setup has been loaded.
8 Press F1 to continue and wait till the operating system is completely
loaded.
9 Shut down your computer.
10 Remove the base cover.
11 Remove the top cover.
12 Remove the processor fan.
13 Remove the video-card fan.
14 Remove the jumper plug from the CMOS jumper and replace it on the
password jumper.
Post-requisites
1 Replace the video-card fan.
2 Replace the processor fan.
3 Replace the top cover.
4 Replace the base cover.
86
To Next Page
Loading...
