Operating the monitor | 69
When you set Preset Modes to FPS, MOBA/RTS, or SPORTS for the first time,
the following message appears:
NOTE: If you select No, the Brightness level will be changed to 75% for
these Preset Modes.
When you change the default setting of pow
er saving features for the first time,
such as Smart HDR or USB Charging, the following message appears:
NOTE: If you select Yes for either of the features mentioned above, the
message will not appear the next time you change the settings of these
features. When you perform a factory reset, the message will appear
again.
When the monitor goes into Standby mode, the
following message appears:
NOTE: The message may be slightly different according to the selected
input signal.
Activate the computer and wake up the monitor to gain access to the OSD.
To Next Page
Loading...
