Updating the firmware
For best per
formance, update your headset and USB wireless dongle firmware to
the latest version.
Updating the headset firmware manually
1. Go to http://www.dell.com/support and search for AW920H.
2. From the Drivers & Downloads tab, download AW920H Headset FW
update tool.
3. Connect your headset to your computer through the USB cable.
4. Open the downloaded AW920H Headset FW update tool file.
5. Click on the Update button.
Once the firmware update is complete, the
“Update Complete! OK” message is displayed.
6. Close the window.
NOTE: Disconnecting the USB cable from the computer, closing the AWCC
software, or shut down of computer during firmware update may damage the
headset.
Updating USB wireless dongle firmware manually
1. Go to htt
p://www.dell.com/support and search for AW920H.
2. From the Drivers & Downloads tab, download AW920H Dongle FW
update tool.
3. Connect your dongle to your computer through.
4. Open the downloaded AW920H Dongle FW update tool file.
5. Click on the Update Dongle button. O
nce the firmware update is complete,
the “Update Complete! OK” message is displayed. Close the window.
NOTE: Disconnecting the USB wire
less dongle, closing the AWCC
software, or shut down of computer during firmware update may damage the
USB wireless dongle.
To Next Page
Loading...
