Updating firmware and restoring factory defaults
│
25
2. Click Update to view the firmware version and check if any new firmware is
available. You can connect the dongle to the USB port and the keyboard
with the USB cable to upgrade your device firmware. Follow the on-screen
instructions to upgrade the device firmware.
3. Click Restore Factory Defaults button to reset the device to the
manufacturing state.
NOTE: Reset Factory Defaults feature resets all the keyboard settings and
configurations to the factory defaults, and then AWCC applies the existing
Lighting and Macro settings to the keyboard when it is connected to the system.
Updating firmware and restoring factory defaults
To Next Page
Loading...
