Alinco DR-435T - Optional Accessories List

10. Maintenance / Reference
Reset
Resetting the transceiver returns all programmed contents to their factory default setting.
If any problems persist, resetting may overcome them and return the transceiver to normal opera-
tion.
Reset Procedure
While holding the FUNC key down, turn the power on. MLONaA + 6 GEF1DCS On JUL
All
segments
of
the
LCD
will
be
displayed,
then
default
set-
Hn
4
HY
HY
#
#
oe
:
n
tings are displayed.
All LCD segments
Note: Take special care when resetting because all settings are initialized.
Factory Default Settings
DR-435T__| DR-435E
VFO frequency 145.00 MHz | 223.50 MHz | 445.00 MHz | 435.00 MHz
CALL frequency | 145.00 MHz | 223.50 MHz | 445.00 MHz | 435.00 MHz
ST en a a
Offset direction é : - - -
Channel step 5 kHz 12.5 kHz 5 kHz 5 kHz 12.5 kHz
Tone frequency 88.5 Hz
DCS setting
DCS code —— oe 023
Output Bowe HI
APO
Squelch level 0 0 0 0 0
41