Need help?Do you have a question about the Alinco DR-599T and is the answer not in the manual?
General| Mode | FM |
|---|---|
| Voltage | 13.8 V DC |
| Receiver Sensitivity | 0.25 μV (12 dB SINAD) |
| Channel Capacity | 200 |
| Receiver System | Double-conversion superheterodyne |
Lists included accessories with the transceiver.
Lists optional accessories for expanded functionality.
Instructions for connecting antennas for mobile installation.
Covers frequency coverage, power requirements, and dimensions.
Details output power, emission modes, sensitivity, and selectivity.
Information and installation for the Tone Squelch Unit.
Information and installation for the DTMF Unit.
Overview of front panel layout, including the Main Tuning Dial for adjustments.
Explains the LCD display and functions of keys like MHz UP/DOWN and H/M/L.
Details the power switch, band selection switches, and microphone port.
Adjusts squelch, volume, and uses FUNC, VFO, REV, MR keys.
Covers PRI, CANCEL, SHIFT, SCAN, SKIP, ARM, CALL key operations.
Discusses TONE, MUTE, and ABX key functionalities.
Explains indicators for band, status, and modes like PRI, ENC, DEC, MUTE.
Details indicators for frequency, signal strength, and power levels.
Connects external speakers and antennas to the unit.
Connector for the 13.8V DC power supply.
Describes MIC, DTMF PAD, LOCK, and REMOTE/DTMF functions.
A brief summary of receiving, transmitting, and programming.
Explains different scan types and priority scan modes.
Covers autopatch, remote control via mic, and DTMF commands.
Details cross-band repeat and DSQ paging functionality.
How to transmit DSQ codes for private or group paging.
Steps for initial setup and powering on the transceiver.
Describes various methods for selecting operating frequencies.
Important warnings and transceiver modes for transmitting.
Details VFO, MEMORY, and CALL modes.
Explains direct functions, FUNC key functions, and repeater offsets.
Covers channel step, frequency selection, and CTCSS tone programming.
Accessing and storing frequencies in memory channels.
Explains ARM memory recall and write procedures.
Details scan options (Band, Memory) and types (Busy, Open, Time).
Steps to initiate scanning and use priority scan modes.
Using autopatch and programming/transmitting autodialer numbers.
Monitoring DTMF codes and controlling unit via mic.
Procedures for enabling remote control and storing settings.
Using the transceiver as a cross-band repeater and its remote control.
Explanation of the DTMF Squelch function and its benefits.
Steps to program DSQ channels and associated codes.
Choosing between Code Squelch, Private, Group, and PG Paging modes.
Operating on two bands simultaneously and full duplex mode.
Function for automatic switching between bands based on signal activity.
Controls for muting audio, locking functions, dimming display, and cancelling operations.
To Next Page
