The
is supplied with a moulded mains plug fitted to the power lead. If the
mains plug has to be replaced, follow the instructions below.
: This apparatus must be earthed
The wires in the mains lead are coloured in accordance with the following code:
As the colours of the wires in the mains lead may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal
in the plug which is marked with the letter E or by the safety earth symbol.
The wire which is coloured Blue must be connected to the terminal in the plug
which is marked with the letter N.
The wire which is coloured Brown must be connected to the terminal in the plug
which is marked with the letter L.
It is recommended that you save all memory data to an external device such as a
MIDI data filer to prevent loss of important data due to a malfunction or user
operating error.
Allen & Heath cannot be held responsible for user data that is lost or destroyed.
To Next Page
Loading...
