ALLEN & HEATH GS-R24 - MAIN & MONITOR OUTPUTS & 2-TRACK INPUTS; Rear Panel Connections

Allen & Heath 25 GS_R24 User Guide
MAIN & MONITOR OUTPUTS & 2-TRACK INPUTS
REAR PANEL CONNECTIONS
2TRACK 2 IN/OUT Phono sockets
Standard RCA phono sockets for unbalanced stereo (2Track) inputs and outputs.
Nominal level = 0dBu
2TRACK 1 input jack sockets
Standard 1/4” (6.25mm) Jack sockets for stereo (2Track) Wired Tip=Hot(+), Ring=Cold
(0V), Sleeve=Chassis. Nominal level is 0dBu.
Main L & R mix Insert Jack Socket
Standard 1/4” (6.25mm) Jack socket for unbalanced insert send and return signals. Wired
Tip=send, Ring=return, Sleeve=Chassis. Nominal level is –2dBu.
Main Mix L & R Output xlr connectors (2Track1)
Standard 3-pin xlr connector for main Left & Right mix outputs. Electronically balanced.
Wired Pin2=Hot(+), Pin3=Cold(-), Pin1=Chassis. Nominal level is +4dBu.
Main Mono Mix Output jack socket
Standard 1/4” (6.25mm) Jack sockets for Mono mix output. Ground compensated.
Wired Tip=Hot(+), Ring=Cold(0V), Sleeve=Chassis. Nominal level is 0dBu.
Monitor headphones Output jack socket
Standard 1/4” (6.25mm) Jack sockets for Headphones output.
Wired Tip=Left, Ring=Right, Sleeve=Chassis.
Control room/Surround monitor output jack socket
Standard 1/4” (6.25mm) Jack sockets for line level output connections to powered speakers
or speaker amplifiers.
Wired Tip=Hot(+), Ring=Cold(0V), Sleeve=Chassis. Nominal level is 0dBu.
For a full description of the monitor speaker combinations please refer to pages 29 & 30.
Main Mono mix Insert Jack Socket
Standard 1/4” (6.25mm) Jack socket for unbalanced insert send and return signals.
Wired Tip=send, Ring=return, Sleeve=Chassis. Nominal level is –2dBu.
CRM/FRONT
R
INSERT L
INSERT R
L
R
2TRK2 IN
L
R
2TRK2 0UT
AUX
5
AUX
6
2TRK1 IN
L
2TRK1 IN
R
MAIN OUT
(2 Track 1)
ALT/REAR
R
L
CENTRE
SUB
MONO OUT
MONO INSERT
PHONES
ALLEN&HEATH
R
L
L