EasyManuals Logo
Home>ALLEN & HEATH>Recording Equipment>GS3000

ALLEN & HEATH GS3000 User Manual

ALLEN & HEATH GS3000
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
GS3000
U
SER
G
UIDE
27
Store a Mute Patch
Select the mutes to be saved in a patch. i.e. Mute LEDs on.
Press
or
to the required patch number.
Press the
STORE
switch. The STORE LED will illuminate.
The 4 MUTE GROUP switches and RECALL switch will start flashing.
Press the
RECALL
switch to overwrite the patch.
The RECALL LED will flash once and the STORE LED will turn off.
The patch is now saved.
Recall a Mute Patch
Press
or
to the required patch number.
Press the
RECALL
switch to select the patch.
The ACTIVE PATCH LED will illuminate.
If a console mute is pressed then the ACTIVE PATCH LED will turn off as the
console mutes are not the same as the stored patch.
If the ACTIVE PATCH LED flashes, then the patch number displayed is not
the last patch recalled.
The ALL Patch
Between patch
127
and
0
is a special patch function called
ALL
.
This lets you overwrite all 128 patches with the current console mute settings.
You would normally do this before programming the patches for a new
recording session.
Typical applications would be:
Turn all mutes off in all patches (clear), then edit the mutes on for required
channels.
Turn all mutes on in all patches (set), then edit the mutes off for required
channels.
Turn unused channel mutes on before editing the used channels.
Turn mostly muted channel mutes on before editing the patches where they
are not muted.
Note that the ALL function overwrites all 128 patches and should be
used with care. A confirm function is included to prevent accidental
operation.
Overwrite All 128 Patches
Operate the mutes to set up the console as required. You may wish to start by
clearing or setting all mutes as described previously.
Press
or
until the
ALL
patch is displayed.
Press the
STORE
switch. The STORE LED will illuminate.
The 4 MUTE GROUP switches and RECALL switch will start flashing.
Press the
RECALL
switch. The RECALL switch flashes only.
The STORE LED will flash.
Press the
RECALL
switch again to confirm the all patch overwrite.
The RECALL will flash once. The patch is now saved.
PATCH
CHANNEL
AUTO
MIDI
ACTIVE
AUTO
MIDI CH

CLR ALL
DUMP

SHIFT

INCREMENT
HOLD FOR SHIFT FUNCTION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ALLEN & HEATH GS3000 and is the answer not in the manual?

ALLEN & HEATH GS3000 Specifications

General IconGeneral
BrandALLEN & HEATH
ModelGS3000
CategoryRecording Equipment
LanguageEnglish

Related product manuals