ALLEN&HEATH iDR training JAN08 Page - 30 - of 49
• Toolbar
: New Opens new session of System manager, either with an offline simulated iDR-8 / 4 or
any online iDR unit.
: Open Configuration An iDR unit only holds a single.cfg. This icon allows you to open
.cfg files stored on your PC/laptop.
: Archive Configuration Either save to PC/laptop a .cfg from a connected iDR unit or save
to PC/laptop a .cfg that you are editing offline.
: Recall iDR Preset Choose and recall a preset.
: Preset Manager Probably the most important window, and one that should remain on-
screen during programming. It is from this window that parameters are stored and presets
are created. It also allows you to view notes about each preset.
: Routing Matrix
: X/P Grps Assign crosspoints to groups.
: I/P Grps
: O/P Grps
: I/P Delay
To Next Page
Loading...
