ALLEN&HEATH iDR training JAN08 Page - 34 - of 49
• Power-up preset
The .cfg file contains 250 user programmable presets. If the iDR unit is to be powered off then on
again, it needs to be instructed which preset to activate on power up. Only a single preset can be
selected to be recalled on power up.
If no preset is selected to be recalled on power up, the iDR will boot in a fixed, non user assignable
preset called ‘Default’. It is then necessary to connect a PC/laptop running System manager
software and recall the desired preset.
To Next Page
Loading...
