ALLEN&HEATH iDR training JAN08 Page - 4 - of 49
• External control
The iDR system can also be controlled by MIDI, AMX, Crestron and RS232 serial commands as
well as connections from third party switches and relays.
This remote control is two way as the iDR can transmit control data.
• System Manager programming software
The system is programmed using our System Manager software. The latest version is always
available from our website as are older versions.
The software runs on a PC or laptop (not MAC compatible) and contains virtual simulations of the
hardware components in the system. The software can be run offline and an entire system can be
programmed and demonstrated without the need to purchase any hardware.
To Next Page
Loading...
