iLive Reference Guide – Firmware Part 2 - 101 AP6526-2 iss.4
MIDI channel
N
MIDI channel 1 to 16 = 0 to F
For Dual-Rack the Slave rack MIDI channel = Master rack MIDI channel + 1
Channel numbers
CH (refer to table)
FX Send 1 to 8 = 00 to 07
FX Return 1 to 8 = 08 to 0F
DCA 1 to 16 = 10 to 1F
Input 1 to 64 = 20 to 5F
Mix 1 to 32 = 60 to 7F
Sysex Header
Sysex Header
This applies to all Sysex messages described later in this specification
F0, 00, 00, 1A, 50, 10, MV, mV, 0N
Where MV = 01 (Major version)
mV = 01 (Minor version)
Mute on
NOTE ON with velocity > 40 followed by NOTE OFF
9N, CH, 7F, 9N, CH, 00
Mute off
NOTE ON with velocity < 40 followed by NOTE OFF
9N, CH, 3F, 9N, CH, 00
Received Mute messages
Velocity 00 and NOTE OFF messages are ignored
Velocity 01 to 3F = Mute off
Velocity 40 to 7F = Mute on
Fader Level
NRPN with parameter ID 17
Fader value LV –inf to +10dB = 00 to 7F
Select channel Parameter Set fader value
BN, 63, CH, BN, 62, 17, BN, 06, LV
To Next Page
Loading...
