ALLEN & HEATH iLive Series

iLive Reference Guide – Firmware Part 2 - 103 AP6526-2 iss.4
Socket Preamp Pad
Sysex message
This turns Pad on or off for the preamp at a socket
MixRack preamp socket ID MP A1 to J8 = 00 to 4F
Surface preamp socket ID MP A1 to D8 = 50 to 6F
To get Pad status from iLive
Send… Sysex Header, 07, MP, F7
Reply… Sysex Header, 08, MP, Pad, F7 where Pad OFF = 00, ON = 7F
To set Pad
Sysex Header, 09, MP, Pad, F7 where Pad OFF = 00 to 3F, ON = 40 to 7F
Socket Preamp 48V
Sysex message
This turns 48V (Phantom Power) on or off for the preamp at a socket
MixRack preamp socket ID MP A1 to J8 = 00 to 4F
Surface preamp socket ID MP A1 to D8 = 50 to 6F
To get 48V status from iLive
Send… Sysex Header, 0A, MP, F7
Reply… Sysex Header, 0B, MP, 48V, F7 where 48V OFF = 00, ON = 7F
To set 48V
Sysex Header, 0C, MP, 48V, F7 where 48V OFF = 00 to 3F, ON = 40 to 7F
Channel Name
Sysex message
This gets or sets the Name with up to 8 characters (up to 5 can be displayed on the iLive strip
LCD)
To get Name from iLive
Send… Sysex Header, 01, CH, F7
Reply… Sysex Header, 02, CH, Name, F7 where Name = string of hex ascii
characters
To set Name
Sysex Header, 03, CH, Name, F7 where Name = string of hex ascii characters
Channel Colour
Sysex message
This gets or sets the Colour with a choice of off or one of 6 colours
To get Colour from iLive
Send… Sysex Header, 04, CH, F7
Reply… Sysex Header, 05, CH, Col, F7 where Col = 00 to 06 (refer to table)
To set Colour
Sysex Header, 06, CH, Col, F7 where Col = 00 to 06 (refer to table)