iLive Reference Guide – Firmware Part 2 - 102 AP6526-2 iss.4
Channel Assignment to Main Mix ON
NRPN with parameter ID 18
ON value = 40 to 7F
Select channel Parameter Set ON
BN, 63, CH, BN, 62, 18, BN, 06, 7F
Channel Assignment to Main Mix OFF
NRPN with parameter ID 18
OFF value = 00 to 3F
Select channel Parameter Set OFF
BN, 63, CH, BN, 62, 18, BN, 06, 3F
DCA Assignment ON
NRPN with parameter ID 40
ON value DB for DCA 1 to 16 = 40 to 4F
Select channel Parameter Set ON
BN, 63, CH, BN, 62, 40, BN, 06, DB
DCA Assignment OFF
NRPN with parameter ID 40
OFF value DA for DCA 1 to 16 = 00 to 0F
Select channel Parameter Set OFF
BN, 63, CH, BN, 62, 40, BN, 06, DA
Channel Preamp Gain
NRPN with parameter ID 19
This adjusts the Gain of the preamp mapped to the channel
To adjust the Gain of preamps by socket ID use the Pitchbend message below instead
GAIN value GV min to max = 00 to 7F = [(Gain – 10) / 55] * 7F
Select channel Parameter Set GAIN value
BN, 63, CH, BN, 62, 19, BN, 06, GV
Socket Preamp Gain
Pitchbend message
This adjusts the Gain of the preamp at a socket
To adjust the Gain of preamps by channel number use the NRPN above message instead
MixRack preamp socket ID MP A1 to J8 = 00 to 4F
Surface preamp socket ID MP A1 to D8 = 50 to 6F
GAIN value GV min to max = 00 to 7F
EN, MP, GV
To Next Page
Loading...
Need help?
General
