To Next PageTo Next Page
Need help?Do you have a question about the ALLEN & HEATH ML5000 and is the answer not in the manual?
General| Faders | 100mm |
|---|---|
| Group Buses | 8 |
| EQ | 4-band EQ per channel |
| Aux Sends | 16 |
| Metering | LED metering |
| Frame Sizes | 32, 40, 48 channel |
| Effects | External effects via aux sends |
| Connectivity | XLR, TRS |
| Control | Analogue |
| Dimensions | Varies with frame size |
| Weight | Varies with frame size |
Covers essential safety guidelines for operating the equipment, including power, grounding, and environmental factors.
Details wire colour codes for connecting mains plugs correctly for safety and functionality.
Explains the mono input preamp, sweepable high pass filter, and 4-band equalizer functions.
Details controls for group routing and auxiliary sends, configurable for FOH or monitor applications.
Describes controls for main L, R, C outputs and masters for group/auxiliary sends.
Explains VCA and mute group assignments, snapshot memory storage, and recall functions.
Covers headphone/monitor controls, solo-in-place, PAFL, intercom, and talkback functions.
Covers installation for free-standing, rack-mounting, location considerations, and proper earthing of the power supply.
Details operating levels, frequency response, distortion, crosstalk, and noise performance of the console.
Describes the parameters and functionality of the console's channel filters and equalizers.
Lists impedance, level, and connector types for all console inputs and outputs.
Explains how to set signal levels for optimal performance, avoiding distortion and noise.
Guides on using LED bar and VU meters for monitoring signal levels and headroom.
How to check the software version and load new operating software via RS232.
