Need help?Do you have a question about the ALLEN & HEATH XONE:96 and is the answer not in the manual?
General| Channels quantity | 8 channels |
|---|---|
| Digital sound processing | - bit |
| Equalizer bands quantity | 4 |
| DJ mixer | - |
| Product color | Black, Grey |
| USB connector type | USB Type-B |
| Master (XLR) out | 1 |
| Headphone connectivity | 3.5 mm/6.35 mm |
| Number of microphone inputs | 2 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50/60 Hz |
| Power consumption (typical) | 45 W |
| Built-in display | No |
Weight and Dimensions| Depth | 410 mm |
|---|---|
| Width | 336 mm |
| Height | 109 mm |
| Weight | 7000 g |
Details the conditions under which the warranty is valid and the process for repairs.
Describes the controls for input channels A and B, including SEND, GAIN, and EQ.
Details the controls for input channels 1 through 4, including EQ and faders.
Explains the function and settings of the crossfader, including its curve.
Details the selectable fader response curves for channel faders and the crossfader.
Describes the dual Voltage Controlled Filter (VCF) sections, their controls, and modes.
Provides detailed information and graphical examples of the XONE:VCF filter types and responses.
Explains the controls for auxiliary return channels C and D, including level and CUE functions.
Details the master level controls, meters, and USB source selection for the main output.
Describes the independent cue system for back-to-back sessions, including level and source controls.
Explains the controls for booth monitoring, including EQ, level, mute, and headphone output adjustments.
Details all input and output connectors on the rear panel of the mixer.
Explains driverless installation and verification for macOS systems.
Guides through downloading and installing ASIO-compatible device drivers for Windows.
Describes how to verify the XONE:96 recognition in macOS Audio MIDI Setup.
Details how to check XONE:96 recognition via the Control Panel in Windows.
Provides a detailed table of MIDI controls, values, and assignments for the mixer.
Explains how to change the mixer's MIDI channel for communication.
Lists detailed hardware specifications including output levels, distortion, and noise.
Details USB soundcard specifications, channel counts, sample rates, and bit depth.
Illustrates the top panel layout with key dimensions and measurements.
Shows the rear panel layout with dimensions and important warnings.
Displays the front panel layout with key dimensions and measurements.
Provides dimensions for the side view of the mixer, including depth.
To Next Page
