ALLEN & HEATH XONE:96 User Manual

ALLEN&HEATH 24 AP11645_1_XONE:96 User Guide
DRIVER INSTALLATION (PC)
PLEASE FOLLOW INSTALL INSTRUCTIONS CAREFULLY
NOTE:
• Please ensure you are logged on to the PC with Administrator access enabled
• When the driver package has downloaded, extract the installer to your computer desktop.
Follow the on-screen instructions as detailed below:
The installer will also prompt you through the steps necessary to install this software.
• Double-click on the XONE:96 Driver Setup file to begin.
• Click Yes on the User Account Control prompt to confirm and continue installation.
• Click Next to run the installer application.
• Click on the Install tab to pre-install the Device Drivers to the default system folder.
A series of messages will be displayed…
Installing XONE:96 Soundcard Device Drivers
Microsoft Windows
®
PC
In order to access the soundcard channels on your XONE:96 you will need to install the dedicated, ASIO*
compatible, Device Drivers, which can be downloaded from the Allen & Heath website:
www.allen-heath.com/xone96
Apple macOS
The XONE:96 is an Apple Mac CoreAudio and CoreMIDI class compliant interface and works on macOS
platforms without any requirement to install hardware device drivers. Refer to p.26 for details to confirm that
the interface and computer are fully connected before opening your Digital DJ, or DAW application.
*ASIO is a trademark and software of Steinberg Media Technologies GmbH

ALLEN & HEATH XONE:96 Specifications

General

Channels quantity	8 channels
Digital sound processing	- bit
Equalizer bands quantity	4
DJ mixer	-
Product color	Black, Grey
USB connector type	USB Type-B
Master (XLR) out	1
Headphone connectivity	3.5 mm/6.35 mm
Number of microphone inputs	2
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (typical)	45 W
Built-in display	No

Weight and Dimensions

Depth	410 mm
Width	336 mm
Height	109 mm
Weight	7000 g