To Next PageTo Next Page
Need help?Do you have a question about the ALLEN & HEATH ZEDi-10 and is the answer not in the manual?
General| Channels quantity | 10 channels |
|---|---|
| Digital sound processing | 24 bit |
| DJ mixer | No |
| USB port | Yes |
| Product color | Black, Grey |
| Master (XLR) out | 2 |
| Headphone connectivity | 6.3 mm |
| USB 2.0 ports quantity | 1 |
| Equalizer bands quantity | 3 |
Weight and Dimensions| Depth | 274.3 mm |
|---|---|
| Width | 332.7 mm |
| Height | 96.5 mm |
| Weight | 2200 g |
Details controls and features of mono input channels, including gain, EQ, sends, and routing.
Explains stereo input channels, their connections, gain, EQ, sends, and routing options.
Covers main outputs, aux/FX outputs, master controls for monitors, headphones, and main mix.
Describes the built-in FX unit, its controls, and how to apply effects like reverb and delay.
Details the 4-in/4-out USB audio interface, connections, and source selection.
Provides solutions for common USB interface issues like pops, clicks, latency, and feedback loops.
Explains the initial setup procedure of setting controls to zero to prevent damage.
Guide to connecting microphones and DI boxes, including phantom power requirements.
Instructions for connecting instruments and line-level sources to various inputs.
Essential guide to setting input gain for optimal signal quality and noise ratio.
How to use EQ filters (lo-cut, HF, MF, LF) to adjust tonal characteristics of signals.
Techniques for balancing channel levels, using PAN, and managing overall mix loudness.
Steps for applying and adjusting built-in effects to enhance the audio mix.
Covers water/moisture, ventilation, heat, servicing, installation, power, grounding, and cover removal.
