Allen-Bradley 1734-AENTR User Manual

Publication 1734-UM014A-EN-P - November 2010
Configure the Adapter for Your EtherNet/IP Network 23
To configure your adapter using the BootP utility, perform the following steps:
1. Run the BootP software.
In the BOOTP Request History panel you see the hardware addresses
of devices issuing BootP requests.
2. Double-click the hardware address of the device you want to configure.

Allen-Bradley 1734-AENTR Specifications

General

Brand	Allen-Bradley
Model	1734-AENTR
Category	Adapter
Language	English