Publication 1734-UM014A-EN-P - November 2010
Configure the Adapter for Direct Connection and Rack Optimization in RSLogix 5000 Software 63
2. From the Who Active dialog, navigate to select the slot where the
controller is located in the chassis.
3. Click Set Project Path.
4. Click Download.
The Download dialog opens.
5. From the Download dialog, click Download.
The Downloading dialog displays the download progress.
Notice that the 1756-ENBT Bridge is now online.
If yellow triangles are present, see the following section.
To Next Page
Loading...
Need help?
General
