134 Rockwell Automation Publication 1756-UM540E-EN-P - December 2017
Chapter 7 Configure ControlLogix Analog I/O Modules
Calibration Tab
The Calibration tab lets you recalibrate the module. Calibration corrects any
hardware inaccuracies on a module.
For information on how to configure each module type, see Chapter 8, Calibrate
the ControlLogix Analog I/O Modules on page 143.
1756-IF8I Module
The analog I/O modules do not require recalibration after operating in an
application.
To Next Page
Loading...
