Publication 1756-IN050C-EN-P - December 2018 PN-504815
Supersedes Publication 1756-IN050B-EN-P - September 2017 Copyright © 2018 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Allen-Bradley, Rockwell Automation, RSLinx, and Studio 5000 are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page.
Specifications
Additional Resources
These resources contain information about related products from Rockwell Automation.
You can view or download Rockwell Automation publications at http://www.rockwellautomation.com/literature/.
To order paper copies of technical documentation, contact your local Allen-Bradley distributor or Rockwell Automation sales representative.
Attribute 1756-EN2T, 1756-EN2TK, 1756-EN2TP, 1756-EN2TPK,
1756-EN2TR, 1756-EN2TRK, 1756-EN2TSC, 1756-EN3TR,
1756-EN3TRK
1756-EN4TR, 1756-EN4TRK 1756-EN2TXT, 1756-EN2TRXT,
1756-EN2TPXT
1756-EN4TRXT
Voltage and current ratings 5.1V DC, 1 A 5.1V DC, 1.2 A 5.1V DC, 1 A 5.1V DC, 1.2 A
Temperature, operating
• IEC 60068-2-1(Test Ad, Operating Cold)
• IEC 60068-2-2 (Test Bd, Operating Dry Heat)
• IEC 60068-2-14 (Test Nb, Operating Thermal Shock)
0 ≤ Ta ≤ +60 °C (+32 ≤ Ta ≤ +140 °F) For Series C Chassis:
• 0 ≤ Ta ≤ +60 °C (+32 ≤ Ta ≤ +140 °F)
For Series B Chassis:
• 0 ≤ Ta ≤ +50 °C (+32 ≤ Ta ≤ +122 °F)
-25 ≤Ta ≤ +70 °C (-13 ≤ Ta ≤ +158 °F)
Temperature, surrounding air 60 °C (140 °F) For Series C Chassis:
• 60 °C (140 °F)
For Series B Chassis:
• 50 °C (122°F)
70 °C (158 °F)
Enclosure type rating None (open-style)
Isolation voltage 30V (continuous), Basic Insulation Type, Ethernet to Backplane, USB to Backplane, and USB to Ethernet, Type tested at 860V AC for 60 s
Wire size Ethernet connections: RJ45 connector according to IEC 60603-7, 2
or 4 pair Category 5e minimum cable according to TIA 568-B.1 or
Category 5 cable according to ISO/IEC 11801-3.
Ethernet connections: RJ45 connector
according to IEC 60603-7, 4 pair Category 5e
minimum cable according to TIA 568-B.1 or
Category 5 cable according to ISO/IEC
11801-3.
Ethernet connections: RJ45
connector according to IEC
60603-7, 2 or 4 pair Category 5e
minimum cable according to TIA
568-B.1 or Category 5 cable
according to ISO/IEC 11801-3.
Ethernet connections: RJ45
connector according to IEC
60603-7, 4 pair Category 5e
minimum cable according to TIA
568-B.1 or Category 5 cable
according to ISO/IEC 11801-3.
North American temp code T4A
ATEX temp code T4
IECEx temp code T4
Resource Description
EtherNet/IP Modules Installation Instructions, publication ENET-IN002
Provides details on how to install and configure EtherNet/IP communication modules.
Ethernet Design Considerations Reference Manual, publication ENET-RM002
Provides details about how to use EtherNet/IP communication modules with Logix 5000™ controllers and communicate with other devices on
the EtherNet/IP network.
EtherNet/IP Secure Communication User Manual, publication ENET-UM003
Provides information on system architecture, configuring secure communication, and diagnostics.
EtherNet/IP Network Configuration User Manual, publication ENET-UM001
Describes how you can use EtherNet/IP communication modules with your Logix 5000 controller and communicate with various devices on the
Ethernet network.
EtherNet/IP Embedded Switch Technology Application Guide, publication ENET-AP005
Provides details about how to install, configure, and maintain linear and Device Level Ring (DLR) networks by using Rockwell Automation
EtherNet/IP devices that are equipped with embedded switch technology.
EtherNet/IP Media Planning and Installation Manual
This manual is available from the Open DeviceNet Vendor Association (ODVA) at http://www.odva.org
Provides details about how to use the required media components and provides information on how to plan for, install, verify, troubleshoot,
and certify your EtherNet/IP network.
To Previous Page
Loading...
Need help?
General
