32 Rockwell Automation Publication IASIMP-QS024C-EN-P - August 2014
Chapter 2 Prepare the Computer and Load Controller Firmware
5. Click Accept All.
The installation process begins.
When installation is complete, your computer has
the software necessary required to complete the
tasks that are described in this publication.
Among other software, your computer has the
following:
• Studio 5000 environment, version 21.00.00
or later
• RSLinx Classic software, version 3.51.00 or
later
You are prompted to activate the software. For more
information on software activation, see the following:
• Rockwell Automation Technical Support Software Activations site
http://www.rockwellautomation.com/rockwellautomation/support/activations.html
To Next Page
Loading...
Need help?
General
