Rockwell Automation Publication 1756-PM004D-EN-P - September 2012 5
Preface
Studio 5000 Engineering and
Design Environment and
Logix Designer Application
The Studio 5000™ Engineering and Design Environment combines engineering
and design elements into a common environment. The first element in the
Studio 5000 environment is the Logix Designer application. The Logix Designer
application is the rebranding of RSLogix™ 5000 software and will continue to be
the product to program Logix5000™ controllers for discrete, process, batch,
motion, safety, and drive-based solutions.
The Studio 5000 environment is the foundation for the future of
Rockwell Automation® engineering design tools and capabilities. It is the one
place for design engineers to develop all the elements of their control system.
Purpose of This Manual
This manual shows how to access I/O and tag data in Logix5000 controllers.
This manual is one of a set of related manuals that show common procedures for
programming and operating Logix5000 controllers.
For a complete list of common procedures manuals, refer to the
Logix5000 Controllers Common Procedures Programming Manual
,
publication 1756-PM001.
The term Logix5000 controller refers to any controller that is based on the
Logix5000 operating system, such as:
• CompactLogix and Compact GuardLogix controllers
• ControlLogix and GuardLogix controllers
• DriveLogix controllers.
• FlexLogix controllers.
• SoftLogix5800 controllers.
To Next Page
Loading...
Need help?
General
